24/7 — Emergency Leak Detection Available Day or Night(951) 299-3473

Pool & Spa Leak Detection in Murrieta, CA

Is it a leak or just evaporation? We run the tests that answer that question and find the exact source when your pool or spa is losing water.

How do I know if my pool is leaking?

Normal evaporation is about a quarter inch of water per day, and more in hot, dry, or windy weather. If your pool drops faster than that, or the level falls even with the pump off, you likely have a leak. A bucket test helps tell the difference.

Southern California summers are hard on pools. It is easy to blame the heat, but a steady drop in water level, a wet spot near the equipment pad, or a green yard patch can all mean a leak in the shell or in the plumbing.

We test the pool in steps so you know where the water is going. That can save you from refilling a leaking pool for months and from paying for repairs that do not fix the real problem.

Pool leak detection listening sensor placed at the pool edge
Pool leak detection listening sensor placed at the pool edge

What are the signs you may need pool & spa leak detection?

Watch for these common warning signs:

  • Water level drops more than a quarter inch a day
  • Level drops even when the pump is off
  • Cracks in the deck or around the pool
  • Air bubbles in the pump basket or returns
  • Wet or soggy ground near the equipment
  • Water bill that keeps climbing from refilling
  • Chemicals that will not stay balanced
  • Tiles loosening or gaps at the skimmer

How does our pool & spa leak detection process work?

  1. 1

    Bucket and evaporation test

    We compare the pool level against a bucket of water to see if the loss is more than evaporation.

  2. 2

    Dye and visual testing

    Dye placed near suspect spots shows where water is being pulled out of the shell.

  3. 3

    Pressure test the plumbing

    We isolate and pressure test supply and return lines to find a loss in the pipes.

  4. 4

    Electronic line tracing

    Listening equipment locates leaks in buried pool lines without tearing up the deck.

What equipment do we use?

  • Electronic listening devices for underground lines
  • Pressure testing equipment
  • Leak-finding dye kits
  • Video pipe inspection cameras

What is different about Murrieta?

Pools are common across Murrieta, Temecula, Canyon Lake, and Menifee, and the sun and low humidity here speed up evaporation. Ground movement can also stress older shells and plumbing, which is why we test both the pool body and its pipes.

Have a leak? Don’t wait for it to get worse.

Our technicians are standing by 24/7 with the equipment to find your leak fast. No unnecessary digging, no guesswork.

How much does pool & spa leak detection cost in Murrieta?

Pool and spa leak detection in Murrieta usually costs about $250 to $650, depending on pool size and how many tests are needed. Pressure testing the plumbing lines can add to the visit. Repairs are priced after the leak is found, often $500 to $2,500 for a line leak.

JobApprox. priceWhat affects it
Pool or spa leak test$250–$650Bucket test, dye test, and visual inspection
Pressure test of pool plumbing lines$150–$400Added when the plumbing is suspected
Repair of a pool line leak$500–$2,500Depends on access and line depth
Shell, light, or fitting repair$300–$1,500Depends on the part and the surface

Prices are approximate estimates for planning. Your final price depends on your property and is confirmed before work begins.

How do you find a hot tub leak?

Hot tub leak detection uses the same tools as a pool. We pressure test the spa plumbing lines, put dye at the jets, light, fittings and cracks, check the pump and heater for drips, and listen for escaping water. A pressure test of the plumbing lines usually adds about $150 to $400.

  • Spa level drops even with the cover on
  • Wet ground or a wet cabinet under the equipment
  • Water around the pump, heater or filter
  • Jets or lights that leak when the spa is full

Frequently asked questions about pool & spa leak detection

How much water loss means my pool has a leak?

Normal evaporation is around a quarter inch per day, and more in hot, dry, or windy weather. A bigger or steady drop is worth testing.

Can you detect a leak without draining the pool?

In most cases, yes. We use bucket tests, dye, pressure testing, and listening equipment, so the pool usually stays full during testing.

Do you detect leaks in spa and equipment lines too?

Yes. We test spas, return and suction lines, and the plumbing around the equipment pad.

Why is my pool losing water but I cannot see a leak?

Many pool leaks are underground or inside the shell, so you will not see a puddle. That is why testing matters.

How much does pool & spa leak detection cost in Murrieta?

Cost depends on the type of leak, the size of your property, and how hard the leak is to reach. We explain the price up front, before a technician is sent. See the cost section on this page for typical ranges, or call us for a clear answer for your home.

How do I do a bucket test for a leaking pool?

Set a bucket of pool water on the first or second step so the water levels match, mark both levels, and run the pump on its normal schedule for 24 hours. If the pool drops more than the bucket, you likely have a leak. Repeat with the pump off to see if the leak is in the plumbing.

What other leak services do we offer?

Pool leaks can also drain into nearby soil, so we check for connected water line problems when the test results call for it. Murrieta Leak Pros also offers Slab Leak Detection, Water Leak Detection, Sewer & Drain Leak Detection, Gas Leak Detection, and Leak Repair & Trenchless Pipe Repair.

We serve Murrieta, Temecula, Menifee, Wildomar, Lake Elsinore, Winchester, French Valley, Canyon Lake, Hemet, Sun City. See all service areas → · More FAQs → · Home

Ready to find your leak?

Our technicians are standing by 24/7 with the equipment to find your leak fast. No unnecessary digging, no guesswork.

Call Now — (951) 299-3473